Barco RHDM-2301 - Install the Barco Stand

Barco - RHDM-2301 - User manual 207
Addendum
7.8.3.1.3 Install the Barco stand
Instructions to mount the Barco stand to the display unit:
• Place the display unit with the front side on a horizontal, flat and stable table, covered with bub-
ble wrap or a similar protective material.
• Mount the Barco stand on the bottom 4 VESA mounting positions with the knurled screws pro-
vided with the stand.
• Place the display unit up-right and verify that the display unit is placed on a flat and horizontal
surface at all times.
Figure 70: Mounting of Barco stand – screw location