Barco RHDM-2301 - Preset Names and Filenames

56 Barco - RHDM-2301 - User manual
How to
3.14.4 Preset names and filenames
The preset names as shown in the Load and Store submenu's of the OSD represent the names of
the preset files.
Following filename syntax is used:
<preset number>-<name>.pre
 <preset number>: The preset number, 1 for preset 1, 2 for preset 2, ...
 <name>: The name of the preset as shown in the Load/Store submenu or when defining
the name in the Store submenu.
Example:
So preset 1 with name 'Test 1' will be represented by a file with name '1-Test 1.pre'.