Barco RLM-W14 - Adjusting Screen Orientation

RLM W14 08/20/2014
55
11.Alignment
11.2 Adjusting screen orientation
By default, the projector is configured for “frontal projection - desktop installation”. If you choose to install your projector in
other setups, be sure to adjust the screen orientation to achieve the correct projection mode.
Front projection - ceiling mode
Press MENU  Advanced ALIGNMENT  Ceiling Mode and choose ON; the projector is now configured for “frontal
projection - ceiling mode”.


Correct Picture
canoe
canoe
canoe
Rear projection - desktop installaion
Press MENU  Advanced ALIGNMENT Rear Projection and choose ON; the projector is now configured for “rear
projection - desktop installation”.

canoe
Correct Picture
canoe

canoe