R5911443 /02 UDM80
Image 8-10: Frame shift menu
2. Use the ▲ or ▼ button to shift the rigging frame (image) in vertical direction.
Use the ◄ or ► button to shift the rigging frame (image) in horizontal direction.
3. Confirm with the OK button.
The frame rotation menu is displayed.
Image 8-11: Frame rotation menu
4. Use the ◄ or ► button to rotate the rigging frame (image) either clockwise or counterclockwise.
5. Confirm with the OK button to return to the frame shift menu, or use the Menu back button to return to the Lens
menu.
8.6 Orientation
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
How to set the correct orientation
1. In the main menu, select Installation → Orientation.
GUI – Installation
To Next Page
Loading...
