NOTE: In some cases not all of the components listed will be on your machine.
NOMENCLATURE
- Hydraulic Pressure Warning Sheet
- Parts Ordering Instructions
- Model Description
- Loader Mounting Instructions
- Control Functions
- Barko Loader Paint
- Tool List
STRUCTURAL
- Head & Frame Assemblies
- Gear & Rack Assemblies
- Platform Assemblies
- Swing Pedal Assembly
- Cab Assemblies
- Windshield Wiper Assembly
- Hydraulic Oil Reservoir Assemblies
- Boom Assemblies
- Subframe (outrigger) Assemblies
HYDRAULIC
- Typical Single Pump Hydraulic Circuits
- Typical Tandem Pump Hydraulic Circuits
- Hydraulic Circuits
Suction, Pressure, Return Circuits
Gear & Rack Swing Circuits
Main Lift Cylinder Circuit
Jib (stick, secondary) Cylinder Circuit
Grapple Open/Close CIrcuit
Grapple Rotate Circuit
Stabilizer (outrigger) Circuits
- Cylinders
Main Cylinders
Jib (stick, secondary) Cylinders
Stabilizer (outrigger) Cylinders
Components are grouped in order of machine model with 40's being first, then 60, then 80.
- Pump Assemblies
Single Pumps (Vickers 21gpm)
Single Pumps (Vickers 28gpm)
Single Pumps (Commercial 25 gpm)
Single Pumps (Commercial 31 gpm)
Tandem Pump (Vickers)
Tandem Pump (Commercial)
- Motor Assemblies
Swing Motor (rotary actuator)
- Valve Bank Assemblies
- Valve Section Assemblies (25P)
- 25P Valve Servicing Information
- Low Lock Valve Assembly
- Relief Valve Assembly (rear mounts only)
- Filter Assemblies
SAFETY/OPERATING/SERVICE
- Table of Contents for this section
DECALS
- Decal Kits/Locations
Table of Contents
To Next Page
Loading...