CARE AND MAINTENANCE
- Keep liquids away from the control panel. Spills on the
control panel will cause damage and possibly
electric shock.
- Secure safe in a proper area to prevent from falling and
causing damage or injury.
- DO NOT disassemble the product. For all repairs,
contact BARSKA Customer Service.
- DO NOT use chemicals or cleaning agents to clean
the safe.
SAFE/LOCK BOX
BC767 4/23
BARSKA warrants this new safe/lock box to be free of defects in
material and/ or workmanship under normal use for a period of twelve
(12) months from the date product is purchased. This limited
warranty is delimited to repair or replacement only. This warranty
does not cover damage caused by improper installation or
maintenance. BARSKA disclaims all liability for incidental or
consequential damages resulting from misuse, abuse, accident
(such as dropping), fire, flood, service or repairs other than those
performed by BARSKA, acts of nature, or arising out of any breach of
this warranty. Altering the product under any circumstances will
automatically void the warranty.
For service under this limited warranty, please have available the
proof of purchase and the purchase date and location as well as a
detailed description of the problem. This warranty is not transferable
and only applies to the original purchaser with a proof of purchase
from BARSKA or from an authorized dealer. This warranty applies
only to products purchased within the United States, excluding
Alaska, the Hawaiian Islands and all U.S. territories in the Caribbean
and the Pacific.
BARSKA will examine and go through troubleshooting procedures,
product repair or replacement of defective part(s) or units with new
part(s) or provide a new unit, if necessary, during the warranty period.
Reasonable shipping/handling charges may apply and are based on
Barska sole discretion. Purchaser shall be required to prepay
Shipping/handling charges with a check or money order to BARSKA
at time product is returned. The Return Merchandise Authorization
Number (RMA#) and shipping/handling charge MUST be obtained
from BARSKA in advance of return. BARSKA shall not be liable for
damages or loss occurring during shipping. Please visit via
www.barska.com or call 909.445.8168 to obtain the RMA#,
Shipping/handling amount, and for more information.
BARSKA reserves the right to modify or discontinue, without prior
notice to the purchaser, any model or style of the product. BARSKA
will determine, at its sole discretion, whether a product will be
repaired or replaced. BARSKA reserves the right to discontinue or
change any feature of its products at any time. If an exact
replacement or product is not available, BARSKA reserves the right
to provide a part or product that matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied, whether of
merchantability or fitness for a particular use, except as expressly set
forth herein. The sole obligation of BARSKA under this limited
warranty shall be to repair or replace the covered product, in
accordance with the terms set forth herein. BARSKA expressly
disclaims any lost profits, general, special, indirect or consequential
damages which may result from breach of any warranty, or arising
out of the use or inability to use any BARSKA product. Any warranties
which are implied and which cannot be disclaimed shall be limited in
duration to a term of one year from the date of original retail
purchase.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitation on how long an implied warranty
lasts, so the above limitations and exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
1 YEAR LIMITED WARRANTY
MOUNTING INSTRUCTIONS
The safe may be mounted to a wall. Be aware of the
load bearing. Failure to do so can result in personal
injury and/or damage to property. Use appropriate
tools when performing work and always use eye
protection.
- Do not mount the safe without anchoring to the
wall.
- Find the studs in the wall, at your desired location.
Most studs are 16 inches or 24 inches apart.
- Check the wall for concealed wires or pipes.
- Measure the location of the pre-set drill holes; mark
their exact position onto the wall ensuring that the
studs or anything else behind will not interfere.
- Drill the appropriate size holes for the anchors you
are using.
- Carefully press the anchor into the holes at
this time.
- Mount the safe by running screws from inside of the
safe and securing to anchors; ensure the safe is
mounted securely.
Note: All information, feature, and specification displayed herein are based on
the data available at the time of publishing, thus they are subject to change
without notice. All product pictures displayed herein are for illustration purposes
only. The actual product may vary due to different circumstances
To Previous Page
Loading...