7 / 28
2.2 Personnel qualifications
Target group Skills
Qualified electricians
• Professional training
• Knowledge and experience to recognise and avoid risks that can
emanate from electricity
• Understanding of the overall system
• Special instruction for potentially explosive atmospheres
IT specialists
• Understanding of the overall system
• Configuration/programming
• Understanding of programming manuals
Warehouse and transport
employees
• Loading and transport activities
• Correct storage
Operators
• Instruction by the operating company on operation, changing and
loading the battery
• Special instruction for potentially explosive atmospheres
2.3 Explosion protection
Incorrect use of the hand-held scanner and its accessories can trigger fires and explosions in potentially explosive
atmospheres.
Read the instructions in this Quick Start Guide thoroughly and follow them when using the device.
In the event of overlaps with user manuals from Zebra, the instructions in the BARTEC User Manual apply. The
BARTEC User Manual takes priority.
2.3.1 Using hand-held scanners and accessories
Always carry out an inspection prior to use (see Chapter 6.2, P. Fehler! Textmarke nicht definiert.).
Ensure that the application area corresponds to the explosion protection marking and permissible ambient
conditions (see the User Manual).
Remove the device from the potentially explosive atmosphere immediately in the event of a malfunction or
damaged enclosure.
Only use accessories specified by BARTEC in the potentially explosive atmosphere.
Have all maintenance work on and inspections of accessories conducted by authorised personnel.
Have all repairs to the hand-held scanner conducted by BARTEC.
To Next Page
Loading...
Need help?
General
