bartesian.com
|
13
2. Carefully pull down on Removable Capsule Seal to
clean. Wash in hot, soapy water and rinse. This part
must be reinstalled before making cocktails.
CAUTION: The Capsule Seal surrounds a sharp
needle that punctures the Cocktail Capsule. To avoid
risk of injury, do not put your fingers on the needle.
3. Capsule Holder and Spirit Bottles with Lids are
dishwasher-safe.
4. Remove Duck-Bill Valve from Spirit Lid Center.
5. Squeeze Duck-Bill Valve to open mouth and free
any buildup. Rinse and dry. Ensure part is properly
inserted onto Spirit Lid Center before use. Not
having Duck-Bill Valve in place will cause Spirits to
leak.
6. To unlock Valve Stem Retainer, use needle nose
pliers and grasp the crossbar on bottom of Lid, then
twist counterclockwise to unlock center. Handle
Spring carefully to prevent from becoming lost.
7. Once the Valve Stem Retainer is out, the Stainless
Steel Spring can be pulled out. The Clear Gasket can
be pulled off from around top of Valve Stem, then
remove Red Gasket from outside of Spirit Bottle Lid.
8. Wash all removable parts in hot, soapy water. Rinse
and air-dry.
Cleaning Removable Parts (cont.)
CARE AND CLEANING
To Next Page
Loading...