EasyManua.ls Logo

Bartscher A300117 - Page 13

Bartscher A300117
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and operation
A300117 11 / 19
EN
Do not expose the scale to direct sunlight as it could lead to discolouration,
malfunction, or damage.
Keep the balance away from water and other liquids as it is not watertight.
WARNING!
If the scale is used in a humid environment it may lead to electric shock,
injury, and electric damages.
Do not place the scale where it will be exposed to dust, wind, vibration, or large
temperature fluctuations.
Do not place the scale in locations with magnetic fields.
Power supply connection
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
To use the appliance with the mains adapter, connect the mains adapter
connector to the designated DC connection located in the rear part of the
kitchen scale.
Then, connect the plug to a single mains socket.
ATTENTION!
Use only the original mains adapter with the kitchen scale. Other adapters
may cause permanent electric damage.
The appliance may also be powered with the integrated rechargeable battery.
The rechargeable battery is charged with the mains adapter connected to the
mains supply.
NOTE: A flat rechargeable battery requires 8 hours of charging. If the
rechargeable battery is fully charged, the kitchen scale may be used for
120 hours.
Pay attention to the level of charging: if the symbol is shown on the digital
display, the kitchen scale must be connected to the mains supply with the mains
adapter.

Other manuals for Bartscher A300117

Related product manuals