Installation and operation
16 / 44 190052
To supply the appliance from water mains system, perform the following steps:
Step 1: Connecting the water hose
1. Connect one end of the delivered water
supply hose (with 1/4" thread) to the water
connection stub at the back face of the
appliance, and the second end (with 1/2"
thread) with the water mains system
connection.
Step 2: Setting the water supply mode
1. Press the 'MENU / OK' button and
hold it for 3 seconds, and with the
'∧ ' and '∨ ' setting buttons select the
'Machine' option. Confirm the
selection with 'MENU / OK' button.
2. Using the '∧' and '∨' setting buttons,
select 'Water supply'.
3. Confirm the selection with 'MENU /
OK' button.
4. Select the 'Tap water' option.
5. To end with and save the settings,
press the 'MENU / OK' button.
6. Then, press the 'Back' button, to
leave the menu.
Step 3: Open the water mains system tap
To Next Page
Loading...
