EN - 6
GENERAL DIRECTIONS FOR ASSEMBLING FURNITURE
1.
Always
read the
instructions carefully before proceeding
with assembly.
2.
Arrange
all
parts
in an
orderly
way and
check
that
everything
is present.
3.
Leave enough room
for
assembling
the
furniture
and work as
close
as
possible
to the
place where
the
furniture
will be located.
4. Work on top of
packaging
to
prevent damage during
assembly.
5. For
tapping drawer guides, hinge blocks,
etc into
place,
lie the
sides
on a
clean surface
for
effective
support.
6. In the case of
dowel joints ensure
that the
dowels
are
always inserted
into the
end-grain
side first.
Carefully
tap the dowels as far as
possible
into the
pre-drilled
holes.
Correct: Incorrect:
MAINTENANCE
We recommend cleaning this item using a damp cloth. Never use aggressive cleaning agents
because these can affect the lacquer or finish and can also be detrimental to the health of your
child.
7. If
needed,
put
down
the
furniture
on its side for
assembling. Make
sure all the
parts remain
well
supported.
To Next Page
Loading...