ImVT 120 II Mini Verticus
Page 60 1st Edition, Rev. 0 Chg. 10
5.3.2 Chamber
Each chamber is made up of an anodized aluminum housing and a filtering cartridge. There are two
general types of filtering cartridges, drying or purifying. The cartridge type is determined by the ingre-
dients packed in the cartridge. The chamber is named after the type of cartridge it contains, i.e. dryer
chamber or purification chamber.
5.3.3 Cartridge
5.3.3.1 Cartridge Construction
The cartridge casing, top and bottom are aluminum and are packed with one or more of the following.
1. A catalyst to convert carbon monoxide to carbon dioxide.
2. Activated carbon which absorbs oil vapors effecting taste and odor.
3. Molecular sieve to absorb oil and water.
5.3.3.2 Cartridge Handling
1. Never open the protective packaging a cartridge comes in prior to its actual use. The highly sensi-
tive filter materials will absorb moisture from the atmosphere becoming saturated and useless.
2. Used cartridges must be disposed of in accordance with local regulations.
Figure 5-5 Oil and Water Separator Labels
Figure 5-6 Cartridge
To Next Page
Loading...
