Bauer Compressors Mini Verticus ImVT 120 II - Cartridge Replacement; Figure 5-7 Oil and Water Separator; Figure 5-8 Sintered Metal Filter Assembly; Figure 5-9 Cartridge Replacement

MNL-0408
June 11, 2009 Page 63
5.4.2 Cartridge Replacement
To change the purification cartridge, proceed as follows. (See Figure 5-9)
1. Disconnect the power and shut off the inlet supply line, if applicable.
2. Depressurize the system by means of the bleed valve.
Figure 5-7 Oil and Water Separator Figure 5-8 Sintered Metal Filter Assembly
1. Filter Head
2. Sintered Metal Filter
3. Center Screw
4. O -rings
Figure 5-9 Cartridge Replacement
1
2
3
4