Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64120
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
I/*(,$"83%L8#$('4$"&8#
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
Q&(X/"*4*%,89%Q&(X%F(*,%E*$%P/
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
R*8*(,7%I/*(,$"83%L8#$('4$"&8#
The Impact Wrench is equipped with a rocker-type
Trigger that can switch between clockwise (forward)
rotation to counterclockwise (reverse) rotation.
1. Press the desired Socket (sold
separately) onto the Anvil.
2. Plug the Power Cord into a
120VAC / 60Hz grounded outlet.
3. Press the LOWER part of the Trigger for clockwise
(FORWARD) rotation or the UPPER part of the
Trigger for counterclockwise (REVERSE) rotation.
M&$*- Do not attempt to use both Trigger
functions at the same time.
OFPGLIMh To prevent injury: Use both hands to
operate the Impact Wrench, keeping one hand on
the Handle and the other hand on the Housing. Do
not hold or touch impact sockets during use.
4. When finished, release the Trigger.
M&$*- The amount of actual torque may vary depending
on the condition of the threads and other factors.
If tightening critical components, check the
actual torque applied to the fastener with
a mechanical torque wrench (not supplied).
5. To prevent accidents, turn off the tool and
disconnect its power supply after use. Clean,
then store the tool indoors out of children’s reach.
To Next Page
Loading...