Page 6 For technical questions, please call 1-888-866-5797. Item 58847
SAFETY OPERATION MAINTENANCESETUP
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. Do not modify the power cord plug provided with the charger. Do not use the
charger if the power cord or plug is damaged. If damaged, have it repaired by a service facility
before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Extension Cords
Note: Extension cords must not be used with this item’s Charger.
Specifications
Battery Type Bauer 20V Li-Ion Battery (64816, sold separately)
Charger Type Bauer 20V Li-Ion Charger (57006, sold separately)
Rated Speed n
0
: 0-3200/min
Chuck Size 1/4″ Hex
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 10 and page 11.
Components
Chuck
Trigger
Speed
Selector
Direction
Switch
Belt Clip
Attachment
Work Light
To Next Page
Loading...
