Bauer BG 24 H - 3.5 ROPE SPECIFICATIONS; 3.5.1 Main Rope

TECHNICAL DATA
BG 24 H / 2010
3 - 6
3.5 ROPE SPECIFICATIONS
WARNING!
Accident risk!
Ropes breaking can cause serious accidents.
• Ropes installed in hoist winches must have a minimum
breaking load
which is at least three times the pulling force.
• The ropes' safety factors must
comply with the standards required for
the equipment and must be observed.
3.5.1 Main Rope
Technical data:
Finished length 75 m
Diameter 28.00 mm
Characteristics:
Lay and direction Cross lay, right-hand (SZ)
Rotation characteristics Low-tension (SPA), non-rotating
Rope end characteristics Pointed / full thimble bore 60 mm