Bauhn FPA38558 User Manual

For best results, lay the antenna flat; using the stand may require adjustment for optimal signal.

Mounting on walls or cabinets is possible, but test reception before permanent installation.

Use the power adaptor if signal strength is low; it can improve reception in some cases.

Experiment with antenna direction, location, and orientation for the best signal reception.

Rescan channels via your TV or set-top box menu after connecting the antenna.

This antenna is designed and intended for indoor use only.

Move the antenna to find the best reception place; try laying it flat if vertical tuning is difficult.

In strong signal regions, turn power off to improve picture quality; high gain may not need amplification.

Connect antenna cable to VCR's Antenna IN, power adaptor to antenna, switch to ON, and auto-tune channels.

Connect antenna cable to USB dongle, USB cable to antenna and computer, switch to ON, and tune channels.

Find a suitable position, test reception, align with mounting holes, and hang the antenna securely.

Connect antenna to TV's Antenna IN, power adaptor to antenna, switch to ON, and auto-tune channels.

Connect antenna to set-top box's Antenna IN, power adaptor to antenna, switch to ON, and auto-tune channels.

Read manual, avoid water/dust, do not remove covers, use qualified personnel for service, supervise children.

Lists included components: Flat Panel Antenna, Power Adaptor, Stand Attachment, USB Cable.

Highlights reception capabilities (HD TV, DAB), 360-degree reception, low noise circuitry, and power options.

Details frequency, gain, polarization, impedance, input voltage, operating power, and connector type.