Bauhn HE210254 User Manual

• CAUTION: No pars of the Selie Gimbal are user
serviceable. Do not disassemble any par of the remote
• CAUTION: Risk of explosion
• If the battery is replaced by an incorrect type.
• If the battery is subjected to high or low extreme
temperatures during use, storage or transporation.
• If the battery is subjected to low air pressure at high
altitude.
• Replacement of a battery with an incorrect type that
can defeat a safeguard (for example, in the case of
some lithium battery types).
• Disposal of a battery into ire or a hot oven, or
mechanically crushing or cutting of a battery, can
result in an explosion.
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of lammable liquid or gas.
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of lammable
liquid or gas.
• CAUTION: Do not ingest battery, chemical burn hazard
This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours
and can lead to death
• Keep new and used batteries away from children
• If the battery comparment does not close securely,
stop using the product and keep it away from children
• If you think batteries might have been swallowed or
placed inside any par of the body, seek immediate
medical attention
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Never add any attachments and/or equipment without
the approval of the manufacturer
• Keep away from children
• Supervise young children to ensure they do not play
with the product
Safety Instructions Product Overview
Technical information
Usage Usage
1. Phone cradle
2. Wing nut
3. Extension pole
4. Bluetooth
remote
5. Tripod
6. LED indicator
light
7. Micro USB
charging por
8. Power button
9. Gimbal motor
10. Cradle lock
• Bluetooth 4.2
• Transmission distance: Up to 10m
• 450mAh lithium battery
• Input Rating: 5V d.c. 1A
Charging the gimbal
When battery in the gimbal is low the LED
indicator light will star lashing red. We
recommend that your charge your gimbal
fully before your irst use (approximately 3
hours for a full charge).
1. Connect the micro USB end of the cable
to the micro USB por and the other
end of the cable to a computer or a USB
adaptor (computer and USB adaptor
not included)
2. The indicator light will stay red to show
that the gimbal is charging
3. Once the gimbal is fully charged the
indictor light will turn of, unplug the
charging cable and your gimbal is ready
for use
Unfold the gimbal
1. Unscrew the wing nut
2. Unfold the gimbal and then tighten the
wing nut
Pairing your mobile device with the
Bluetooth remote
1. Press the remote button for 4 seconds
to turn the power on. A small LED light
will lash on the remote to indicate
pairing
2. Turn on Bluetooth on your mobile
phone, search and pair with “Gimbal
Selie”
NOTE: Make sure your mobile is visible to other
devices for the irst pairing
3. The LED indicator will stop lashing aer
pairing has been successful
NOTE:
• The remote control will automatically shut
down aer 5 minutes if not paired
• The remote control will automatically sleep
aer 10 mins without any operation and
auto shut down aer another 10 mins if
not used
• Long press the remote button to power of.
The LED indicator will lash 3 times then the
remote control will shut down
• Taking a photo: When the Bluetooth remote
is connected to the mobile phone, shor
press of the camera button and the blue
light will lash
USER GUIDE
HE210254
12/21
SELFIE GIMBAL
6
7
3
8
1
4
5
2
9
10

Bauhn HE210254 Specifications

General

Brand	Bauhn
Model	HE210254
Category	Camera Accessories
Language	English