Bauhn HE215029 Getting Started Guide

After Sales Support 1300 663 907
www.winplus.com.au
1. UNPACK
Unpack your Bauhn Cordless Headphones from the packaging and check you have all of the components:
• 1 x Base Unit
• 1 x Cordless Headphones
• 1 x 3.5mm Audio Cable
• 1 x RCA Cable
• 1 x Power Adaptor
• 1 x Instruction Manual
• 1 x Getting Started Guide
• 1 x Warranty Card
Getting Started Guide
2. POWER THE BASE UNIT
Insert the power adaptor plug to the rear of the base unit. Plug in the power
adaptor into a power point and turn ON. The LED on the front of the base
unit will turn red when connected to power and a channel has been selected.
Place the headphones on to the base unit. The charge indicator will turn
yellow.Chargefor3hoursbeforerstuse.
3. TURN ON CORDLESS HEADPHONES
When the base unit is powered, switch ON the headphones by pressing
thepowerbuttonontherightearcup.Thebluelightwillashintermittently
to indicate that the headphones are ON.
Model - HE215029
PLU - 49431
12/2018
Version 1.0
.

Bauhn HE215029 Specifications

General

Type	Over-Ear
Connectivity	Wired
Driver Size	40mm
Frequency Response	20Hz - 20kHz
Cable Length	1.2m
Connector	3.5mm
Ear Coupling	Circumaural
Impedance	32 ohms