o Place the microwave into the housing unit.
o IMPORTANT: Do not push the microwave fully into the housing
unit, as you still need to be able to access adjustment screw A at
this stage of the installation.
o Turn adjustment screw A, ensuring that there is a 1 mm gap
between adjustment screw A and the underneath of the top
surface of the housing unit.
o Push the microwave fully into the housing unit.
o IMPORTANT: Care should be taken to ensure that you do not
trap or kink the power cord.
o Open the microwave door and locate screw-hole B. Use screw B
to fix the microwave oven to the housing unit.
30
To Next Page
Loading...
