Baumuller B MaXX 4000 Series - Type plate BM4-F-DIO;FIO-XX for standard controller

Design and Operation
Instruction handbook b maXX (BM4-F-)DIO/FIO-XX (Digital IO module)
Document No. 5.01046.06
25
of 74
4
4.2.2 Type plate BM4-F-DIO/FIO-XX for standard controller
The type plate can be found on the connector on the back side of the BM4-F-DIO/FIO-XX.
The type code and the serial No. are printed on the type plate.
Figure 3: Type plate BM4-F-DIO/FIO-XX for standard controller
NOTE!
EtherCAT option modules must not be plugged in slot J of a 3-rowed controller unit,
because the module can be damaged.
In case another BM4X-X-XXX plug-in module is plugged in an unsuitable slot, it will
not operate. We have made sure, that neither the module nor the device are dam
-
aged.
Type plate
e.g.
back side
BM4-F-DIO-01
4 digital IN \ 4 digital OUT
S12345678