Baumuller B MaXX 4000 Series - Type code DIO;FIO-XX in ES controller; Display and operation elements

Design and Operation
Instruction handbook b maXX (BM4-F-)DIO/FIO-XX (Digital IO module)
Document No. 5.01046.06
29
of 74
4
4.3.2 Type plate DIO/FIO-XX in ES controller
The type code of the DIO/FIO-XX is included in the type plate of the basic unit.
4.3.3 Type code DIO/FIO-XX in ES controller
The type code has the form:
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXXXX] - [XXX] - XX.
Directly behind the type code is the version code
(- XXXX - X - XXX - XXX).
Only the shown section is valid for the Digital IO module in ES controller:
4.4 Display and operation elements
The encoder module provides neither operation nor display elements.
The LED H4 of the basic unit b maXX BM4000 respectively the emulation of the LED in
ProDrive displays all device errors, including the errors generated concerning the Digital
IO module.
NOTE!
Only 2 analog outputs can be parametrized or linked even more than one AIO module
is available.
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXX] - [XXX] - XX
Device generation
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXX] - [XXX] - XX
ES controller function module, position A
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXX] - [XXX] - XX
ES controller function module, position B
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXX] - [XXX] - XX
ES controller function module, position C
BM4XXX - XXX - XXXXX[Ryy] - [XXXXXX] - [XXX] - XX
ES controller function module, position D
M
N
U
V
Digital IO (4 x IN, 4 x OUT) see
fast Digital IO (4 x IN, 4 x OUT) see
Digital IO without PE connection (4 x IN, 4 x OUT)
fast Digital IO without PE connection
(4 x IN, 4 x OUT) see
DIO-01
FIO-01
DIO-11
FIO-11