Baumuller B MaXX 4000 Series - Mounting; Preparation of mounting

33
of 74
Instruction handbook b maXX (BM4-F-)DIO/FIO-XX (Digital IO module)
Document No. 5.01046.06
6MOUNTING
In this chapter we describe the mechanical mounting of the plug-in module
BM4-F-DIO/FIO-XX for BM4400, BM4600, BM4700 with standard controller.
6.1 Preparation of mounting
h Check the marking DIO/FIO-XX, wether the right plug-in module is available.
Figure 5: BM4-F-DIO/FIO-XX for standard controller
h Determine the suitable slot
(see ZSlots BM4-F-DIO/FIO-XX for standard controller– on page 23).
NOTE!
The Digital IO module are mounted stationary in the BM4400, BM4600, BM4700
with ES controller and cannot be changed, therefore no mounting is necessary!