Disposal facilities/authorities
Instruction handbook b maXX (BM4-F-)DIO/FIO-XX (Digital IO module)
Document No. 5.01046.06 Baumüller Nürnberg GmbH
66
of 74
11.2
11.2 Disposal facilities/authorities
Ensure that the disposal is handled in compliance with the disposal policies of your com-
pany, as well as with all national regulations of the responsible disposal facilities and au-
thorities. In case of doubt, consult the bureau of commerce or environmental protection
authority responsible for your company.
NOTICE!
Avoid polluting the environment as a result of improper disposal.
Therefore:
m Only dispose in compliance with the health and safety regulations.
m Take heed of any special local regulations. If you are unable to directly ensure safe
disposal yourself, commission a suitable disposal contractor.
m In the event of a fire, hazardous substances could possibly be generated or re-
leased.
m Do not expose electronic components to high temperatures.
m Beryllium oxide is used as inner insulation, for example for various power semicon-
ductors. The beryllium dust that is generated upon opening is injurious to the
health.
Do not open electronic components.
m Dispose of capacitors, semiconductor modules and electronic scrap as special
waste.
WARNING!
Danger as a result of faulty deinstallation!
The deinstallation and disposal requires qualified personnel with adequate experi-
ence.
Therefore:
m Only allow deinstallation and disposal to be performed by qualified personnel.
To Next Page
Loading...