1C1, 1D1 Connections for the DC link, see ZFigure 81– on page 164.
X2 Connections for pulse enable, etc. see ZX2
Digital inputs/outputs– on page 177
X7 Encoder evaluation 1
X8 Encoder evaluation 2
X107 BM5323, BM5325
Motor connection 1
BM5331, BM5332, BM5333
Motor connection 1 and 2
X108 BM5323, BM5325
Motor connection 2
X200 Connections for 24 V voltage supply; for additional information, see ZFig
ure 81– on page 164
(SELV/PELV).
X206 Connection for 24 V voltage supply for the motor brake, see Table X206 on Zpa
ge 168–. For
connector assignment see ZX206
/X207/X208– as from page 198.
X207 Connections for motor temperature and motor brake of motor 1, see table X207 on Zpag
e 169–.
For connector assignment see ZX2
06/X207/X208– as from page 198.
X208 Connections for motor temperature and motor brake of motor 2, see table X208 on Zpag
e 169–.
For connector assignment see ZX2
06/X207/X208– as from page 198.
X300 Signal bus
Connection diagrams
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
156
of 328
7.13
To Next Page
Loading...