Baumuller b maXX 5000 Series - Page 186

Connections on the front side
Instruction handbook b maXX 5000
Document No.: 5.09021.16 Baumüller Nürnberg GmbH
186
of 328
7.15
Analog inputs
Voltage input Current input
Resolution 14 bit
Type Differential input
Input resistance Approx. 50 k Approx. 100 
Input current Max. 250 µA Min. (0)
 4 A,
Max. 20 mA
Input voltage -10 V to +10 V Max. 2 V
Sampling rate 125 µs
Power supply encoder Max. 250 mA per connection
Linearity error inputs in LSB
Error Min Type Max
DNL 0 2 4
INL 0 3 6
Offset 0 3 6
Gain 0 3 6
NOTE!
The connections of the cables of the an
alog channels must be done shielded.
Blade terminals with 6.3 mm width are available for connecting the shields.