Baumuller b maXX BM3400 Series - Safety Relay Functionality

Safety relay (option) 6.15T
6.15 Safety relay (option)
The following figure schematically shows the function Safe stop, which is actuated at use of safety relay.
Figure 6.49: Schematic sketch safety relay
WARNING
The following c an occur, if the safety instruction is not complied with:
• serious personal injury
• d eath
The danger is: mechanical influence because of fail of the safety relay
Provide that the minimum load of the contacts X102-1 and X102-2 does not fall below during
operation. Operate the safety relay within the specification (see «Appendix D - Technical data»
from page 178).
Instrution Manual b maXX ® BM3400 107
Doument No.: 5.07013.03 from 206