Baumuller b maXX BM3400 Series - 7.5 Display elements - LED; 7.5.1 Current limit (H1); 7.5.2 Operating condition (H2, H3); 7.5.3 Life sign (H4)

T 7 Operation
7.5 Display elements - LED
On the front of the device there are 4 LEDs. Within the operating software WinBASSII they are emulated and
therewith also can be displayed on a monitor.
7.5.1 Current limit (H1)
The left red LED (H1) shows, if the device is working a t the current limit.
7.5.2 Op erating ondition (H2, H3)
The LEDs in the middle (H2 and H3) show the torque direction.
• H2 (yellow): negative torque direction
• H3 (orange): positive torque direction
7.5.3 Life sign (H4)
• If the controller is ready-to-operate, the right, green LED (H4) blinks every one second.
• If data sets are read or written (EEPROM accesses), the green LED is blinking with a higher frequency.
116 Instrution Manual b maXX ® BM3400
from 206 Doument No.: 5.07013.03 Baumueller Kamenz GmbH