T 1 Introdution
1.2 Survey of the appliane series b maXX
®
BM3400
A device of the b maXX® BM3400 series consists of a power unit and a controller, which are in a common
housing. The devices are available in graded power and housing sizes. In this manual the Baumüller device
series b maXX® BM3400, its connection and the commissioning is explained. Further information in order
to operate the device and in order to program the controller part is to be found in the Parameters manual.
WARNING
The following can occur, if the safety instruction is not complied with:
• serious personal injury
• death
All persons, who work at and with these devices of the series b maXX® BM3400, must have this
manual at hand and the instructions and notes herein - especially the safety notes - must be
considered.
1.3 First steps
• Check the delivery, see «Transportation and packing» from page 31.
• Care for suitable personnel for mounting, installation and commissioning.
• Hand over this manual to the personnel being responsible for mounting, installation and commission-
ing. Assure, that especially the specified safety instructions are understood and complied with.
1.4 Used terms
For the Baumüller product b maXX® BM3400 in this manual also the term device is used. A list of the abbre-
viations, which are used is to be found in «Appendix A - Abbreviations» from page 153.
1.5 Copyright and trade marks
• b maXX® is a registered trade mark of Baumüller Nürnberg GmbH
• Hiperface® is a registered trade mark of SICK/Stegmann
12
Instrution Manual
b maXX
®
BM3400
from 206 Doument No.: 5.07013.03
Baumueller Kamenz GmbH