Baumuller b maXX BM3400 Series - B.2 Memory module; B.3 CAN cable termination resistor; B.4 Screening plates

Memory mo dule B.4T
B.2 Memory mo dule
For a quick transfer of data sets between b maXX® BM3400 devices the memory module „BM4-PSI-01“ can
be used, which can be obtained under item no. 350462.
Figure B.1: Memory module BM4-PSI-01
B.3 CAN able termination resistor
You can obtain terminating resistors for the CAN bus under part no. 00346408 „BM4-CAN-T01“.
B.4 Sreening plates
In order to lay the cable screening according to EMC, at the devices screening plates can be used, as shown in
the following figure. The plates are available under item no. 409274 ( HS0) and 409273 (HS1).
Figure B.2: Screening plate
Instrution Manual b maXX ® BM3400 157
Doument No.: 5.07013.03 from 206