Baumuller b maXX BM3400 Series - Requirements for Executing Personnel during Mounting

Requierements to the exeuting p ersonnel 5.2T
CAUTION
The following may occur, if you do not observe this caution information:
• proper ty damage
The danger is: High temperature. At the heat sink of the b maXX® BM3400 temperatures of up
to 90°C may occur.
Assure that the mounting plate is able to resist these temperatures without problems.
5.2 Requierements to the exeuting p ersonnel
CAUTION
The following may occure, if you do not observe this caution information:
• minor to medium personal injur y
The danger is: sharp edges. In case, while installing, you lift a device with unprotected hands,
fingers or palm can be cut. If the device falls off, your feet can be cut up.
Assure, that only qualified personnel, who is familiar with the safety- as well a s with the mount-
ing instructions, mount this d evice.
• wear safety gloves
• wear safety shoes
Qualified personnel are persons, who have been instructed by the responsible person, based on their train-
ing, experience, the instructions they were given as well as their knowledge about relevant standards and
instructions, knowledge of the accident prevention instructions and of the company, to carry out the neces-
sary operations and thereby are able to recognize and avoid the dangers which could happen. The required
qualifications for the work with the device for example are:
• Training or instruction due to the standards of the safety engineering in maintenance and use of appro-
priate safety equipment.
Instrution Manual b maXX ® BM3400 45
Doument No.: 5.07013.03 from 206