Baumuller b maXX BM3400 Series - 5.3 Prepare mounting

T 5 Mounting
5.3 Prepare mounting
You can prepare the mounting with the project manual for your facility. With the project manual and the
«Drill patterns» from page 49 you can determine the dimensions for the cut-outs and the fastening drills.
CAUTION
The following may occur, if you do not observe this caution information:
• minor to medium personal injury
The danger is: eye injury due to catapulting particles. While executing the drillings and the
cut-out metal particles are catapulted.
• wear eye protection
• Carry out the drillings and if necessary the cut-outs.
46 Instrution Manual b maXX ® BM3400
from 206 Doument No.: 5.07013.03 Baumueller Kamenz GmbH