Baumuller b maXX BM3400 Series - 5.4 Installation space

Installation spae 5.4T
5.4 Installation spae
The following d rawings show the main dimensions of the devices in mm. Use this drawings, to determine the
required space in the switching cabinet. For the c onstruction of the necessary drillings and cut-outs use the
drawings from page 49.
170
194
85
12
65
170
194
12
167
100
100
Figure 5.2: Installation space b maXX® BM3400 HS0 a nd HS1
NOTE
Please pay attention, that mounting the devices is only allowed like showed in the drawings
(vertically w ith fresh air flow from bottom to top). Mounting several devices side by side is
possible. Assure that the required free space of 100mm on top and below the device is left to
avoid blocking the air circulation, which is necessary to cool down the device.
Instrution Manual b maXX ® BM3400 47
Doument No.: 5.07013.03 from 206