Baumuller b maXX BM3400 Series - 5.5 Drill patterns

Drill patterns 5.5T
5.5 Drill patterns
The following drawings show the drilling patter ns of the device. Use this drawings, to prepare the necessary
drillings / cut-outs. Use the drawings from page 47, to determine the required space in the switching cabinet.
184
194
85
5
42,5
184
194
65
5
32,5
Figure 5.4: Drilling pattern b maXX® BM3400 HS0 and HS1
Instrution Manual b maXX ® BM3400 49
Doument No.: 5.07013.03 from 206