Baumuller BM5-O-SAF-000 - Warranty and Liability; Customer Service; Terms Used; Certification

General
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07
13
of 114
2
2.9 Warranty and liability
All the information in this operation manual is non-binding customer information; it is
subject to ongoing further development and is updated on a continuous basis by the
permanent change management system of Baumüller Nürnberg GmbH.
Claims of warranty or liability towards Baumüller Nürnberg GmbH are rejected, in
particular if one or more of the reasons listed in chapter
ZIntended use– on page 18 has/
have been the cause of the damage/s.
The operation of the devices described here in accordance with the specified methods/
procedures/requirements is permissible. Everything else, even the operation of devices
in installation positions not depicted here, for instance, is not permissible and must be
clarified with the factor on a case-by-case basis. The warranty will be rendered null and
void if the devices are operated differently than described here.
2.10 Customer service
Our customer service is available for technical support.
Information on the competent contact person can be found at any time via telephone, fax,
E-mail or over the Internet.
2.11 Terms used
A list of the abbreviations used can be found in ZAppendix A - Abbreviations– from page
97 onward.
2.12 Certification
The Safety Module (BM5-O-SAF-001-000) from Baumüller Nürnberg GmbH has been
developed in accordance with the standards specified in
ZChapter 2.12.1– and certified
by TÜV Rheinland.
EC Type Examination Certificate Number: 01/205/5031.01/16
Test report no.: 968/M 264.05/16
Notified Body: 0035
The Safety Module (BM5-O-SAF-001-001) from Baumüller Nürnberg GmbH has been
developed in accordance with the standards specified in
ZChapter 2.12.1– and certified
by TÜV Rheinland.
EC Type Examination Certificate Number: 01/205/5563.03/18
Test report no.: 968/FSP 1400.03/18
Notified Body: 0035