Personnel training
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07 Baumüller Nürnberg GmbH
20
of 114
4.6
4.6 Personnel training
WARNING!
Risk of injury if operated by insufficiently qualified persons!
Improper handling can lead to severe personal injury and property damage.
Therefore:
m Only allow certain activities to be conducted b
y persons specified in the respective
chapters of this operation manual.
The following qualifications for various areas of ope
ration are specified in the operation
manual:
m Operating personnel
The drive system may only be operated by p
ersons who have been trained, instructed
and authorized to do so.
Troubleshooting, repairs, cleaning, maintenance and exchange may only be
conducted by trained or instructed personnel. These persons must be familiar with the
operation manual and act according to it.
Commissioning and instruction may only be conducted by qualified personnel.
m Qualified personnel
Electrical engineers and specialist electricians of
the customer or a third party who are
authorized by Baumüller Nürnberg GmbH, trained and certified in the installation and
commissioning of Baumüller drive systems and commissioning, grounding and
designating electrical systems and devices in accordance with the safety engineering
standards.
Qualified personnel is educated or trained in the maintenance and use of suitable
safety equipment in accordance with the respective local safety engineering standards.
To Next Page
Loading...