Conduct in the event of danger and accidents
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07 Baumüller Nürnberg GmbH
24
of 114
4.12
4.12 Conduct in the event of danger and accidents
Preventive
measures
m Always be prepared for accidents or fire!
m Keep first aid equipment (first-aid box, bla
nkets, etc.) and fire extinguishers on hand!
m Instruct personnel in accident reporting, fir
st aid and rescue equipment.
In case of
emerg
ency: Act
properly
m Put the device out of operation immediately with the EMERGENCY STOP.
m Introduce first aid measures.
m Keep people out of the danger zone.
m Inform the supervisors at the site.
m Notify a doctor and/or fire department.
m Clear access routes for rescue
vehicles.
4.13 Signage
The following symbols and notification signs are found in the work area. They relate to
their immediate installation environment.
WARNING!
Injury hazard due to il
legible symbols!
In the course of time, stickers and symb
ols on the device can become dirty or
otherwise illegible.
Therefore:
m Keep all safety, warning and operation signs o
n the device in easily legible
condition at all times.
Electric current
Only qualified personnel may work in work spaces with this marking.
Unauthorized persons may not touch work equipment bearing this marking.