Baumuller BM5-O-SAF-000 - 13 Commissioning and Exchange of the Module; General Safety Regulations

77
of 114
Operation Manual Safety Module for b maXX 5000 BM5-O-SAF-000/-001
Document no.: 5.09013.07
13COMMISSIONING AND EXCHANGE
OF THE MODULE
This chapter describes the commissioning process of the Safety Module. The process of
commissioning ensures that the Safety Module functions properly. In addition, the
chapter describes how the module is exchanged.
Before beginning the commissioning process, make
sure that the following prerequisites
have been fulfilled:
1 Th
e Safety Module is installed correctly.
2 No
people or parts are in the danger zone.
3 Th
e converter is ready for use.
CAUTION!
The commissioning of the Safety Module is o
nly allowed after the acclimation of the
module.
Please take note of ZTro
ubleshooting and rectification– from page 87 for rectifying errors
during the commissioning process.
13.1 General safety regulations
h Follow the chapter ZSafety– from page 17 .