Baumuller BM5300 Series - Mounting of Toroidal Cores; Drilling Pattern Toroidal Cores

Mounting
Instruction handbook b maXX 5000
Document No.: 5.09021.16
119
of 328
6
6.4 Mounting of toroidal cores
The use of toroidal cores, see ZToroidal cores– on page 287 is necessary to ensure the
operation of the active mains rectifier BM51XX within a C2 surrounding.
6.4.1 Drilling pattern toroidal cores
Use the drilling pattern for drilling the necessary holes.
*: With toroidal cores
Figure 50: Dimensions/drilling pattern toroidal cores
NOTE!
The toroidal core should be mounted approx. 100 mm under the device.