Baumuller DA 100 - Page 25

TAM 00612 25
DA 100 – 280 W 06 / 2011
Three-phase synchronous motor water-cooled English
Warranty and liability
All the details in this documentation are non-binding customer information and subject to ongoing
change and will be constantly updated by our editing staff. Warranty and liability claims against
Baumüller Nürnberg GmbH are excluded if, in particular, damage is caused by one or more of the
following:
- You have not followed the instructions in this documentation.
- You have not used the system for the purpose intended.
- You have
• installed, connected, started or operated the machine incorrectly or have
not maintained it
• permitted the system to be mounted, connected, commissioned, operated,
and/or maintained by unqualified or insufficiently qualified personnel.
• overloaded the system.
• operated the system with
o faulty safety devices,
o safety devices that were incorrectly fitted or not fitted,
o safety devices or protective devices that are not in working order.
• Not operated the system in the stipulated ambient conditions
- You have modified the system without the written approval of Baumüller Nürnberg GmbH.
- You have not observed the instructions concerning maintenance in the component
descriptions.
- You have not monitored parts that are subject to wear sufficiently.
- You have performed a repair incorrectly.
- You have combined the system with products from other manufacturers in an improper
manner.
- You have combined the drive system with faulty and/or incorrectly documented products
from another manufacturer.
The latest version of the General Terms and Conditions of Sale of Baumüller Nürnberg GmbH always
apply.
These will be made available to you at the latest on conclusion of the contract.