2.4 Technical Data
Designs (EN 60034-7) IM B3, IM B5 (size 100 - 160)
IM B3, IM B35 (size 180 - 280)
Degree of protection (EN 60034-5) IP 54
Cooling method (EN 60034-6) IC 3W7 (liquid-cooled)
Electrical connections (see Appendix 1)
Main connection Terminal box
Control connection 12-pin Standard: Resolver
12 / 17-pin Option: Sincos encoder
17-pin Option: EnDat 2.1
9-pin Option: EnDat 2.2
Brake (optional) separator connection
Thermal sensor Connection in the terminal box
Thermal motor protection (EN 60034-11) Thermal sensor KTY84 in stator winding
Winding insulation (EN 60034-1) Thermal class F
Ambient temperature 0 °C to +40 °C
Altitude (EN 60034-1) ≤ 1.000 m above sea level
Storage -30 °C…+60 °C (+ 85 °C, comp. Section 2.5)
Note: To avoid frost damage, cooling water should be removed at temperatures < 3°C!
Bearing Rolling-contact bearings with long-term grease
lubrication
Ball bearing with re-lubrication device (DA 280.W)
Calculated bearing life 20.000 h (approximate value)
Vibration severity (EN 60034-14) Level A (formerly N)
Shakeproof (EN 60068-2-6) Radial 3 g (20 Hz to 55 Hz)
Axial 0.5 g (20 Hz to 55 Hz)
Holding brake Option
Speed actual value encoder Standard: 2-pole resolver
(higher quality version on request)
Option: Sincos encoder
Option: EnDat encoder
For further technical data, refer to our DA 100 - 280 technical product list online at:
www.baumueller.com
under Download and Technical documentation. If necessary, you can
request the corresponding documentation.
Caution!
If the electric motor supplied is not a standard type as per the technical documentation or if special
contractual arrangements have been made, there may technical differences to these
Commissioning and Maintenance Instructions. In this case request the related technical
supplements.
TAM 00612 9
DA 100 – 280 W 06 / 2011
Three-phase synchronous motor water-cooled English
To Next Page
Loading...
