Flue options
Flue options
300 min
Terminal
Assembly
Top View Rear Flue
Property Boundary Line
Plume
Displacement
Kit
Air Inlet
Opening Window
or Door
150mm MIN.
IMPORTANT:
If tting a Plume Displacement Flue Kit, the air inlet must be a minimum
of 150mm from any opening windows or doors.
NOTE: The distance from a fanned draught appliance terminal installed parallel to
a boundary may not be less than 300mm, in accordance with the diagram above.
MX8013 - Technical pocket guide DL v14_post proof.indd 12 30/08/2012 14:29
To Next Page
Loading...
