Neta-tec Combi GA
Flue options
Plume Displacement Kits Ø 60/100mm
Part No. 720627001
Part No. 720622901
Plume Displacement
Terminal Kit inc.1m
Extension
Part No. 720643401
Part No. 720643301
Plume Displacement
Kit Extension &
Brackets
Part No. 5121370
Part No. 720648601
Plume Displacement
Kit Bend - Pair
Part No. 720644601
Stainless Steel PDK
Guard Ø 60/100 - Air
Intake
Part No. 5121369
Part No. 720648701
Plume Displacement
Kit Bend
White Black
IMPORTANT:
If tting a Plume Displacement Flue Kit, the air inlet must be a minimum
of 150mm from any opening windows or doors.
The inlet of the PDK MUST be at least 300mm above ground or
balcony level or any projection or ledge. A guard must be tted where
the inlet is below 2 metres.
500mm Min.
For Plume Displacement Kit permissible ue lengths please see page 13.
MX8013 - Technical pocket guide DL v14_post proof.indd 26 30/08/2012 14:29
To Next Page
Loading...
