Need help?Do you have a question about the Bayrol NATURALLY SALT Salt Relax POWER and is the answer not in the manual?
General| Brand | Bayrol |
|---|---|
| Line | NATURALLY SALT |
| Type | Salt Relax POWER |
| Cell type | Titanium electrode |
| Power supply | 230V |
Guidelines for mounting the device on a flat, vertical surface, including spacing and environmental considerations.
Details on connecting the device to the power supply and ensuring safe electrical hookups.
How to power the Salt Relax POWER using an external timer or filter control system.
Using the Salt Relax POWER to control the filtration pump, including connection to a mains socket.
Instructions for securely connecting the chlorine production cell's power and sensor cables.
Guidance on routing and connecting the temperature sensor cable to the device.
Visual representation of the Salt Relax POWER system connection, including cell placement in bypass.
Table detailing permissible and recommended values for key water parameters like salt, pH, and chlorine.
Guidance on choosing appropriate salt for electrolysis systems, avoiding unsuitable types.
Formulas for calculating the water volume of different pool shapes (rectangular, oval, round, figure-8).
Formulas for determining the amount of salt needed for both fresh fills and topping up existing water.
Step-by-step instructions for adding salt to the pool, including pre-checks and post-addition filtration.
Detailed explanation of the information presented on the main operating screen, including indicators and values.
How to rapidly activate the Boost function and adjust chlorine production output via the Quick Access menu.
Settings and modes for controlling the pool's filtration pump operation.
Manually switching the filtration process on and off without timer or additional functions.
Setting daily switch-on and switch-off times for the filtration pump to run on a schedule.
Manually switching the pool lighting on and off.
Setting switch-on and switch-off times for the pool lighting based on a daily or interval schedule.
Manually switching auxiliary relays on and off for connected external devices.
Setting switch-on and switch-off times for auxiliary relays to control external devices automatically.
Activating auxiliary relays for a defined duration via a programmable key press.
Configuring and calibrating the pH and redox measurement and control parameters.
Calibrating the temperature sensor for accurate pool heating control.
Adjusting the chlorine production cell's output intensity and other related parameters.
Choosing the desired language for the device's menus and interface.
Configuring the device's internal clock and date for accurate logging and scheduling.
Assigning predefined external devices or functions to the Salt Relax POWER's relays.
Defining the duration for which the chlorine production cell operates on polarity 2.
Setting the pause duration between polarity changes for the chlorine cell.
Defining the delay before the disinfection dosing pump activates based on redox values.
Setting the active time for the disinfection dosing pump based on redox measurements.
Defining the pH regulation mode (unidirectional or bidirectional) and dosing direction.
Controlling temperature display and enabling the Smart filtration mode.
Setting up temperature-controlled heating operation for the pool.
Lists all components included with the pH option module for installation.
Detailed instructions for installing the pH module, requiring specialist knowledge.
Steps for correctly installing the pH electrode into its holder and connecting it to the device.
Guidance on positioning the pH dosing pump and installing the injection nozzle for chemical dosing.
Defining the desired pH setpoint for unidirectional or bidirectional pH regulation.
Step-by-step guide for performing a two-point calibration using pH 7 and pH 10 buffer solutions.
Lists all components included with the redox option module for installation.
Detailed instructions for installing the redox module, requiring specialist knowledge.
Steps for correctly installing the redox electrode into its holder and connecting it to the device.
Step-by-step process to measure and determine the appropriate redox setpoint for pool water.
Lists all components included with the WIFI option module for installation.
Step-by-step instructions for physically installing the WIFI module into the Salt Relax POWER.
Guidance on selecting a suitable location for the WIFI module to ensure good signal quality.
Identification and location of all external connections and internal fuses on the device.
Step-by-step guide on how to safely open the device's front cover for access.
Instructions for replacing the device's backup battery, typically for maintaining time settings.
How to create additional cable entry points using push-outs and cable glands.
Guide on inserting the optional pH and redox modules into the device's designated slots.
Procedures for automatic and manual cleaning of the chlorine production cell to prevent limescale buildup.
Routine checks and upkeep for the pool system components, including water values and filter.
Instructions for cleaning the exterior of the Salt Relax POWER unit.
To Next Page