REMOTE BASS CONTROL MODULE (CSA300.1 OPTIONAL)
Before connecting the remote, it will be necessary to find a mounting location that
will be easy to access for adjustment. Once you select your mounting location, you
will need to run the control wire from the remote to the amplifier. To avoid
possibility of induced noise from the car's electrical system (i.e. popping noises or
engine noise), run the cable from the remote to the amplifier away from the car's
electrical wiring.
Please note: Once the remote is plugged in, it overrides the bass boost on the
amplifier and becomes the primary bass adjustment.
13
POWER
BASS
BOOST
12dB
0dB
X-OVER
130Hz
40Hz
LEVEL
INPUT
OUTPUT
REMOTE
L
R
MAXMIN
MAX
MIN
To Next Page
Loading...
