BAZZ WFCAMOUT - Quick Start Pairing; Initial Preparation; Pairing Steps; Pairing Notes

QUICKSTAR - PAIRING
1- Preparation:
1. Conrm the device is powered on.
2. Conrm the device, smartphone and router are as
close to each other as possible.
3. Conrm the phone is connected to the WiFi router
and to the internet.
2- Pairing steps:
1. Open your app, tap the icon "+" on the top right
corner of "Devices" page, select the type of device
you want to add (camera).
2. After you hear a sound from the camera, click "OK"
in the app. Follow the steps indicated until you
input your WiFi password and conrm.
3. Scan the QR code that appears on your
smartphone with the camera. Place your
smartphone at about 20-30 cm away from the
camera.
4. Wait for conrmation.
3- Note:
If you have trouble pairing the device with the QR
code, try using the smart cong pairing process.
Follow the on-screen instructions.