Need help?Do you have a question about the BBE MP24M and is the answer not in the manual?
Ensures connection to ground for electrical safety.
Guidelines for safe and damage-free operation.
Ensure correct voltage and use proper cabling for safety.
Warning against accessing internal areas and proper fuse use.
Safe cleaning methods and referring servicing to qualified personnel.
Caution regarding safe movement of equipment on carts.
Highlights the key features and capabilities of the MP24M mixer.
Fields for recording the serial number and purchase date.
Explanation of adjust encoder and navigation button functions.
Details on LCD displays and overview of available DSP functions.
Explanation of Low/High Pass Filters and Noise Gate parameters.
Explanation of Compressor parameters: Comp, Gain, Ratio, Release, Attack, Threshold.
Details on EQ functions and parameters: EQ, Low Shelf, High Shelf, Freq, Gain, Q.
Explains Phase Invert, Delay, Pan, and Stereo Link functions.
Instructions for accessing and adjusting the BBE Sonic Maximizer®.
Details channel assignment to Subgroups, Mains, AUX, and FX sends.
Functionality for saving, loading, and copying DSP presets.
Explanation of LED meters and overview of console inputs.
Details on the two stereo AUX inputs and their controls.
Features of the Talkback microphone input and Tape Input functionality.
Information on the 2.4G Wireless input, pairing, and controls.
Overview of Subgroups, Main, Monitor, and AUX output channels.
Controls for headphone monitoring and AUX send levels.
Controls for FX Send/Return and overview of the Digital FX Library.
Parameters and settings for the FX1 editor.
Explanation of gain display bars and fader/volume controls.
Function to display and adjust levels for AUX and FX sends.
Details on AUX 1 Bus Mixer and FX1 Bus Mixer interfaces.
Explanation of the 31-band Graphic EQ for Main, Subgroup, and AUX buses.
Overview of the Scene function for saving and recalling settings.
Details on the LAMP connector and overview of rear panel connections.
Details on AUX, SUB, Mono, Main, CTRL, Tape, AES/EBU, and USB ports.
Information on 48V Phantom Power and Talkback Mic Input.
Minimum computer system requirements for MP24M connectivity.
Instructions for downloading and installing the driver software.
Overview of dynamic, ribbon, and condenser microphone types.
Guidance on microphone placement for various instruments.
Explanation of dynamic range and compression basics.
Details on Compression and its effects on audio signals.
Definitions of compressor and noise gate parameters.
Introduction to EQ functions, parametric, and graphic EQ.
Explanation of shelving EQ types and MP24M's graphic EQs.
Guidance on EQ setting strategies and best practices.
EQ suggestions for various instruments (Cut/Boost/Why).
Frequency ranges and their effects on sound for mixing.
EQ settings guidance based on instrument tonality and room acoustics.
Specific EQ suggestions for Vocals and Percussion Snare.
EQ suggestions for Electric Bass, Guitars, and Keyboards.
How to use subgroups for efficient mixing and instrument grouping.
Creative use of subgroups for assigning effects mixes.
How to use AUX buses for monitor mixes and external effects.
Using AUX buses to send signals to external effects processors.
Explanation of reverb effect, parameters: Decay, Predelay, HF/LF Decay.
Explanation of delay effect, parameters: Delay Time, Variable Feedback.
Steps for setting levels and Solo Bus functionality.
How to use the Solo Bus for monitoring and troubleshooting.
Detailed technical specifications for microphone inputs, line inputs, outputs.
Specifications for digital audio, ADC/DAC, and internal processor.
Visual representation of the MP24M's internal signal flow.
Possible causes and solutions for pops, distortion, no output, and fader issues.
Details on warranty registration, void conditions, and service procedures.
To Next Page
General