BBH SMX 12-2 - 5.5.2 Installation I;O-extension; 3.1.1.1 Physical address configuration of the slave modules (central;decentral)

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 111 of 234
Version: 50F
5.5.2 Installation I/O-extension
Note:
Max. 2 SMX3x modules can be operated with one basic unit.
3.1.1.1 Physical address configuration of the slave modules (central/decentral)
On the SMX3x module the bus address must be set with the help of the address switch.
This setting is made on the back of the module
Note:
• Address range of the SMX3x module from 1...15.
• Address "0" is reserved for the basic device.