HB-37350-810-01-51F-EN SMX Installation manual.docx Page 16 of 234
Version: 50F
3 Device types
The series SMX10/11/12 consists of
- Basic devices SMX10/11/12
- Extension modules SMX3x
- decentralised expansion modules SMX32x
- communication modules with standard field bus SMX5x
- integrated communication modules with safe field bus SMXxx-x(/2, /4x, /x)
Basic devices
Series SMX10/11/12 is a compact fail-safe control system with optionally integrated drive
monitoring for one (SMX11/11-2) or two (SMX12/12-2) axes.
The device is freely programmable for safe processing of EMERGENCY OFF buttons, two-
handed controls, light barriers, operating mode selection switches etc. as well as drive-related
safety functions.
Pre-configured modules for safety relevant signal pre-processing are available for a vast
number of input devices. The same applies for safety functions serving the purpose of drive
monitoring. Detailed information can be found in the programming manual.
The basic version of the device has 14 safe inputs and up to 5 safe cut-off channels.
Single encoder solutions as well as two encoder solutions are supported for reliable speed
and/or position detection. See „Encoder specifications“.
Extension modules
Central or decentralised I/O expansion modules for SMX10/11/12 series.
A maximum of 2 expansion modules can be used.
Communications-, modules and integrated interface
The communication interface has a bi-directional data transfer from and to a subordinate control
via standard field bus or secure standard field bus.
To Next Page
Loading...