BBH SMX 12-2 - 5.11.3 Connection variants; 5.11.3.1 Connection of an absolute encoder as master

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 163 of 234
Version: 50F
5.11.3 Connection variants
5.11.3.1 Connection of an absolute encoder as master
Sub-D-
Stecker
(9 polig)
SMX
Absolut-
Encoder
(Master-Betrieb)
n.c.
n.c.
CLK-
DATA+
DATA-
n.c.
CLK+
Versorgungspannung
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Ground
With this type of the connection the clock pulses of the module SMX run to the absolute
encoder and the data from the encoder to the SMX.
Sub-D plug
(9 pin)
SMX
absolute
encoder
(Master mode)
Supply voltage
GND of the supply voltage
24 V DC